53,995 research outputs found

    Acoustic controlled rotation and orientation

    Get PDF
    Acoustic energy is applied to a pair of locations spaced about a chamber, to control rotation of an object levitated in the chamber. Two acoustic transducers applying energy of a single acoustic mode, one at each location, can (one or both) serve to levitate the object in three dimensions as well as control its rotation. Slow rotation is achieved by initially establishing a large phase difference and/or pressure ratio of the acoustic waves, which is sufficient to turn the object by more than 45 deg, which is immediately followed by reducing the phase difference and/or pressure ratio to maintain slow rotation. A small phase difference and/or pressure ratio enables control of the angular orientation of the object without rotating it. The sphericity of an object can be measured by its response to the acoustic energy

    Single mode levitation and translation

    Get PDF
    A single frequency resonance mode is applied by a transducer to acoustically levitate an object within a chamber. This process allows smooth movement of the object and suppression of unwanted levitation modes that would urge the object to a different levitation position. A plunger forms one end of the chamber, and the frequency changes as the plunger moves. Acoustic energy is applied to opposite sides of the chamber, with the acoustic energy on opposite sides being substantially 180 degrees out of phase

    Is the squeezing of relic gravitational waves produced by inflation detectable?

    Get PDF
    Grishchuk has shown that the stochastic background of gravitational waves produced by an inflationary phase in the early Universe has an unusual property: it is not a stationary Gaussian random process. Due to squeezing, the phases of the different waves are correlated in a deterministic way, arising from the process of parametric amplification that created them. The resulting random process is Gaussian but non-stationary. This provides a unique signature that could in principle distinguish a background created by inflation from stationary stochastic backgrounds created by other types of processes. We address the question: could this signature be observed with a gravitational wave detector? Sadly, the answer appears to be "no": an experiment which could distinguish the non-stationary behavior would have to last approximately the age of the Universe at the time of measurement. This rules out direct detection by ground and space based gravitational wave detectors, but not indirect detections via the electromagnetic Cosmic Microwave Background Radiation (CMBR).Comment: 17 pages, 4 Postscript figures, uses revtex, psfig, to be submitted to PRD, minor revisions - appendix B clarified, corrected typos, added reference

    Gravity enhanced acoustic levitation method and apparatus

    Get PDF
    An acoustic levitation system is provided for acoustically levitating an object by applying a single frequency from a transducer into a resonant chamber surrounding the object. The chamber includes a stabilizer location along its height, where the side walls of the chamber are angled so they converge in an upward direction. When an acoustic standing wave pattern is applied between the top and bottom of the chamber, a levitation surface within the stabilizer does not lie on a horizontal plane, but instead is curved with a lowermost portion near the vertical axis of the chamber. As a result, an acoustically levitated object is urged by gravity towards the lowermost location on the levitation surface, so the object is kept away from the side walls of the chamber

    BRST quantization of the massless minimally coupled scalar field in de Sitter space (zero modes, euclideanization and quantization)

    Full text link
    We consider the massless scalar field on the four-dimensional sphere S4S^4. Its classical action S=12∫S4dV(∇ϕ)2S={1\over 2}\int_{S^4} dV (\nabla \phi)^2 is degenerate under the global invariance ϕ→ϕ+constant\phi \to \phi + \hbox{constant}. We then quantize the massless scalar field as a gauge theory by constructing a BRST-invariant quantum action. The corresponding gauge-breaking term is a non-local one of the form SGB=12αV(∫S4dVϕ)2S^{\rm GB}={1\over {2\alpha V}}\bigl(\int_{S^4} dV \phi \bigr)^2 where α\alpha is a gauge parameter and VV is the volume of S4S^4. It allows us to correctly treat the zero mode problem. The quantum theory is invariant under SO(5), the symmetry group of S4S^4, and the associated two-point functions have no infrared divergence. The well-known infrared divergence which appears by taking the massless limit of the massive scalar field propagator is therefore a gauge artifact. By contrast, the massless scalar field theory on de Sitter space dS4dS^4 - the lorentzian version of S4S^4 - is not invariant under the symmetry group of that spacetime SO(1,4). Here, the infrared divergence is real. Therefore, the massless scalar quantum field theories on S4S^4 and dS4dS^4 cannot be linked by analytic continuation. In this case, because of zero modes, the euclidean approach to quantum field theory does not work. Similar considerations also apply to massive scalar field theories for exceptional values of the mass parameter (corresponding to the discrete series of the de Sitter group).Comment: This paper has been published under the title "Zero modes, euclideanization and quantization" [Phys. Rev. D46, 2553 (1992)

    The metrology of spherical shells using synchrotron x ray microtomography

    Get PDF
    With recent advances in solid state imaging technology and the increasing availability of synchrotron x-ray radiation sources, synchrotron x-ray microtomography is emerging as a nondestructive technique for the evaluation of the structure and composition of small specimens with spatial resolution in the micron range. Synchrotron radiation offers the following advantages over conventional x-ray sources: high brightness, continuous emission which is tunable over a large energy range, faster data collection rates, and a highly collimated beam of large cross section permitting the illumination of large specimens. Synchrotron x-ray microtomography enables the structure of individual spheres to be evaluated in order to reveal the concentricity and sphericity of the internal void and the uniformity of the shell wall in the case of high quality spherical shells for Sandia National Laboratories' Inertial Confinement Fusion project

    Slow light in degenerate Fermi gases

    Get PDF
    We investigate the effect of slow light propagating in a degenerate atomic Fermi gas. In particular we use slow light with an orbital angular momentum. We present a microscopic theory for the interplay between light and matter and show how the slow light can provide an effective magnetic field acting on the electrically neutral fermions, a direct analogy of the free electron gas in an uniform magnetic field. As an example we illustrate how the corresponding de Haas-van Alphen effect can be seen in a neutral gas of fermions.Comment: Slightly updated. Phys. Rev. Lett. 93, 033602 (2004
    • …
    corecore